Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 9-11" CST Lift kit Chevy Silverado/Suburban

  1. #1
    Senior Member SFA_Chevy's Avatar
    Join Date
    Oct 2012
    Location
    Lancaster/Davis, CA
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts

    9-11" CST Lift kit Chevy Silverado/Suburban

    I recently did a SAS on my 2003 2500HD and I'm selling the CST lift I had on the truck to help offset the cost. The kit comes complete with uniball upper control arms, dual schock hoops, torsion keys, torsion bar drop down brackets, cradle with aluminum skid plate, cradle supports, center draglink with stabilizer, heim joint tie rods and center link support rods, both diff mounting brackets and the 2wd support bar. The cradle has been repaired by a professional fabricator. Gussets were added on the lower drivers's side of the cradle due to a crack in the welds. I ran the cradle in this condition for a couple years with no problems. You can see the repair work in the picture. I also have a set of torsion bars, lower control arms and uprights that I'd be willing to let go for a killer deal if you need them as well. ALL hardware necessary to install the kit is included!

    The parts are located in Southern CA.

    $1,000 OBO for a kit that costs more than $5,000 new!


    Lift kit 1.jpgLift Kit 2.jpg


  2. #2
    Member Ol' Daisy HD's Avatar
    Join Date
    Nov 2012
    Location
    Youngsville, LA
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Man one of those would look badass on my truck. If only that but would fit a 02 1500 hd

  3. #3
    Senior Member SFA_Chevy's Avatar
    Join Date
    Oct 2012
    Location
    Lancaster/Davis, CA
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Ol' Daisy HD View Post
    Man one of those would look badass on my truck. If only that but would fit a 02 1500 hd
    It WILL fit on your 02 1500HD!
    2003 Chevy 2500HD with a '79 Ford Dana 60 up front on 38's

  4. #4
    Junior Member
    Join Date
    Nov 2012
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hmm. Shipping?

  5. #5
    Senior Member SFA_Chevy's Avatar
    Join Date
    Oct 2012
    Location
    Lancaster/Davis, CA
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Eg6ky View Post
    Hmm. Shipping?
    Where to? If it's reasonable I'll cover it, if not the buyer will have to. These parts weigh quite a bit.
    2003 Chevy 2500HD with a '79 Ford Dana 60 up front on 38's

  6. #6
    Junior Member
    Join Date
    Nov 2012
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Few questions:
    Is everything straight?
    Will this work on a 4WD?
    I don't see shocks, are they included in this?

  7. #7
    Junior Member
    Join Date
    Nov 2012
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I'm in Ky, but it will be shipped to a business. I would like to know if it will fit a 4wd as well.
    42001 is the zip.
    Last edited by Eg6ky; 11-21-2012 at 03:51 PM.

  8. #8
    Senior Member SFA_Chevy's Avatar
    Join Date
    Oct 2012
    Location
    Lancaster/Davis, CA
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by tfskidoo View Post
    Few questions:
    Is everything straight?
    Will this work on a 4WD?
    I don't see shocks, are they included in this?
    Yes, everything is straight. My truck was the only one out of all my buddy's that would actually trac straight down the road lol.
    I have four Fox 2.0 Reservoir shocks I will include for an additional $200. They were rebuilt not too long ago.

    And YES this works with 4WD, I have a front driveshaft (not pictured) I will include.
    2003 Chevy 2500HD with a '79 Ford Dana 60 up front on 38's

  9. #9
    Registered User one bad chad's Avatar
    Join Date
    Oct 2012
    Location
    McLeansville N.C.
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts
    this is a deal !!

  10. #10
    Junior Member
    Join Date
    Nov 2012
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    shoot me a text on the number I provided via pm, and I'll get back after work.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •